Want something that will scare your friends? Slice and print this Halloween spider box! When you pull the lid open, a spider jumps out and pounces on your fingers. You can put a candy bar logo on the front to make people open it, just let your imagination go 😜 

Things you will need:                                 

Some string, I used jute string 

A short piece of wire 

A handle with a bolt to attach 

And a rubber spider 🕷 

This will need supports.For the piece that brings the spider out of the box, I used a piece of bent wire and crimped it on the rod. I uploaded a picture of the wire so you can bend yours the same way. Make sure the wire doesn't go too close to the back wall, so you have room to glue the spider to the wire. I just used a rubber spider for mine. Tie a short piece of string to the rod, and wrap it around the rod a few times, before fasting it to the underside of the lid. I put my string under the bolt that held the handle on the lid. Slide the lid in between the two sides and put the rod in its designated holes, then pull the lid and see if the wire comes up from under the lid and lands on the handle. If it doesn't, you will have to adjust the wire, or adjust how many times the string is wrapped around the rod. Just do whatever works. Hope you enjoy!