Created these files to add a stern style action/fire button to my virtual pinball machine. Switch mounting can be made thicker to adjust for any difference in mounting height. Switch mounting can also be double sided taped to receiver to secure or using the two screw positions for the leaf switch, drill and tap the receiver to accommodate the screws (I used M3 x 12mm) just be careful of spring below.

You'll Need:

• 1 off 1-1/8" Clear Flipper Button
• 1  off Fire Button Housing
• 1 off Fire Button Nut
• 1 off Leaf Switch 
• 2 off M3 x 10mm Pan Head Screws (Preferably Nylon If Using Glass Playfield)
  • ***Use M3 x 12mm or 16mm instead if using mounting screws to secure the mount***
• 4 off WS2812 Addressable Leds (minimum) and leads, although RGB leds could be used. 

Long term plan is to modify to suit a small pcb to house the addressable leds and make wiring a touch easier. The button mount could do with a locating/locking feature similar to the original stern housing but i also didnt want it to be difficult to modify for people. 

There is also a great post on VPF to help with adding code to table scripts to add the functionality.