Some simple bins to screw to the top of a work bench or desk to hold tools, cables, parts, etc. in the often-present gap between the wall. 

These bins were tailored to my printer (Prusa MK4S) and the gap behind my workbench, so the best way to use them would be to customize the .step files for your application. 

Designed to be semi-modular, currently only have “Full” (~4inch width) and “Half” (~2in) sizes but could be divided or expanded easily. All depths are 2 inches but also easily changeable. Includes two heights, 2.5 and 4in (below lip, plus 8mm height above lip)

Fixed to desk with M3x8mm screws

Printing Instructions

Widths of walls were designed for Prusa MK4S extrusion width of 0.45mm. 

-Print with 3 perimeters

-0.2mm Layer height (will probably work fine with 0.25 except for Link and maybe Holder, but haven't tested)

-Print Link with 2mm brim and simply leave it attached to give a nice “Dogbone” look to the connection

-15-20% infill