IDEA 1.61

You've already done the hardest part... Coming up with an idea.

Mini Corner Post

Description:

Replicate easily a simple piece to put two pieces of a 3mm material together making a 90 degree angle for each other.

Guide

Some projects need others to work. CASEgamma and utilities are an example of projects that are used by others to run, it is recommended to download the complete repository to ensure the correct rendering of projects.

You can clone it or download it in.zip from

Projects are licensed under the GPLV3 license, which is consistent with the 4 fundamental freedoms of free software, so feel free to study the code, replicate it and modify it at your convenience as this repository contributes to free software!

Hints

As the model is modifiable, the dimensions that will be required in your case must be checked very well and the type of material with which is to be manufactured.

Link on thingiverse:

Post by idea161 on Thingiverse:

License:

This thing was created by Thingiverse user idea161, and is licensed under cc.

IDEA 1.61:

Web site: idea161 org

Thinguiverse

Youtube Channel 1.61

Social:

Instagram IDEA 1.61

Facebook IDEA 1.61

Telegram Channel IDEA 1.61

LIDSOL:

Web site: LIDSOL

For more objects and models like this, follow us on:

(Available until May 2018).

For more materials and models like this one, follow us on:

(Available from May 2018 onwards).

Disclaimer:

This contribution is for the purpose of making a contribution to the community and helping with construction.

After reading the Factors to consider, we are not responsible for any inconvenience, hoping that these models will be to your liking.

Legal Notice:

IDEA1.61 LEGAL NOTICE © Copyright IDEA1.61 2018. All rights reserved. IDEA1.61 logo is a copyrighted work.

DITAC LEGAL NOTICE © Copyright Ditac 2018. All rights reserved. Ditac logos is a copyrighted work.

TRONXY X5S

No

No

200

20

Maybe you should rotate 90 degrees the piece to have a nice print