Dust remover for a CNC mill. The adapter of the mill motor at the CNC has a width 0f 80mm an a hight of 20mm. The mill motor is a Kress 1050.

The "Saugadapter Standard" is attached by 10mm neodym magnets and can be removed within seconds.

For assembling you need 6 neodym magnets with 10mm diameter and 2mm width. Mount the "Absaugschuh Final" with four M4 srews to the motor adapter.

The curtain is made out rubber from a tire hose and attached with two cable ties.

Use a hose with 32mm to the vaccum cleaner

I use a kaercher vaccum cleaner and a zyclon durst remover from ebay. I also printed adapters for the cyclon with 50mm diameter to the kaercher and the 32mm hose.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

Yes

Supports:

Resolution:

0,2mm

Infill:

Notes:

Printed with ABS, all other material will work too.

Post-Printing

How I Designed This ===================

Designed with Fusion 360.

Category: Tools