A simple holder, to quickly connect a ISP-Programmer to a custom PCB via 2x3 Pogo pins. The pins have 2.54mm spacing and the wires are soldered directly to the Pins. the overhang has a angle of 45 degrees, to keep it printable without support. I printes in in PLA but any rigid Material should be useable.

It is screwed to a gh-201-b toggle clamp. I removed the handle an just move the lever manually, as shown in the Pictures. The orange part ist a cutom holder for a PCB, which is not public. You will have to make your own holder for your usecase.