This is a Power station for 4 Raspberries. My wall-mount plug for raspberry power is fully occupied and no free plug is available. So, I created a Power station for 4 Raspberries using only one plug for the transformer.

The basis is just a sleeve over the transformer as the transformer is mounted on a DIN-Rail it keeps the basis in place. Maybe I add something to fix/mount the station at a later stage.

-Update: OK, I created a copy of the basis with inserts for M3 nuts to fix/mount the basis at the transformer from to or button side (or both ;))

-Update: I changed the lid to be able to put a label above the Raspi text.
File change - Deckel-V2.stl

Parts I used (I bought all from a local electronic dealer)

Meanwell MDR-60-5 10 Ampere 5Volt
4 Relais Module (for Arduino/Raspberry)
4 Push Bottons Switch with Led (blue)
(push to switch on, another push to switch off)
4 USB Cable with open end cable
M3x16 mm allen screw
M3 nuts
M6x16mm flat head screw
Standard 230V Power cable
2 Wago 222-415
Cables: K05V-K 0,5mm2, Jumper wire cable female

Printed parts:
2 Wago 5-wire: 222-415 from my remix
https://www.thingiverse.com/thing:4675584

The M6 threads in the distance rods need to be "cleaned" by a screw tap.

Prusa

i3 MK3 MMU 2

Yes

Yes

0.2

25%

the distance rods are printed with rafts and 100% infill