Winner of the first edition of Boeliebots in the Groninger Forum, this is Raspberry.

A horizontal spinner Antweight Battlebot. Weighing in at only 140 grams, it's maneuverable and can deal quite some damage to it's opponents.

Printing

Frame (raspberry.stl) & Lid (raspberry-lid.stl) in ASA (use the Print ready.3mf files for painted on supports). The provided GCode for a Prusa Mk3S contains an in layer color swap on the first layer, to make the text stand-out. Check my other model for printing tips with in layer color swaps.

Weapon (raspberry_disk.stl)  in PETG-CF for a nice bite in your opponent. There is enough weight left to cut one out of metal instead as well!

2 x Wheels (small_ring_wheels.stl) in TPU, for extra resilience.

Non printed parts:

• 1 x Receiver (e.g. AFHDS 2A Mini or Happymodel ELRS EPW6 PWM)
• 2 x N20 6v 500 RPM
• 1 x Emax Eco 1407 Motor - 2800kv
• 1 x Kingmodel 2x5A Bi-directional Brushed ESC
• 1 x Switch (SS12F15)
• 1 x 2/3S 20A Brushless ESC (e.g. LittleBee)
• 2 x CNC Kitchen M3 short heatset inserts
• 2 x M3x6mm hexbolts (for lid)
• 2 x M2.5x5mm hexbolts (for switch)
• 2 x 34mm (inner dia) x 3mm o-ring
• 3 x 2.5x100mm cable ties
• 1 x Reely RE-7851447 350mAh 2S lipo (other sizes might fit: 60x30x10mm)

Optional non printed parts:

• Cloth tape & cutt-off from cable tie for guiding strip on the lid.
• Extra cable ties for cable management.

CAD Files available!

Rasperry was designed in FreeCAD and the source files are available under a permissive license, feel free to modify (and improve!) upon the design! Hope to see you in the arena!