The orginal Tile Jig was too tight for my tiles, V2 has extended center clearance to 100.6 x 100.6mm testing now!

Work holding jig for a 4 inch (99.5mmx99.5mm) ceramic tile from Lowes for laser engraving.

Base is 10mm high, edges come up another 5 leaving 2mm of tile on top.

Can be screwed to wooden bed, using the 4- 5mm chamfered holes.

This work holding goes along with my Test Tile design. Burn the outer 110mmx110mm into your wooden bed, use that to align your jig to your machine.