What you need per Gate: 

- 1x Pool Noodle 

- 20mm Aluminum tube (M20 KIR) 2x 20cm - 

Printed Parts: 

-2x Noodle Cup (light)

-2x FPV Noodle Gate Ceiling adapter

-2x Groundspike Ring (optional)

Tools: 

-1x Hole Cutter 

-1x Notch Tool 

-1x Groundspike Tool 

Instructions:

Print FPV Noodle Gate Ceiling in TPU

Print parts and Tools in PLA, PETG, ABS, etc.

Insert 3mm squaresquare bar or 3mm Nail in the the groundspike Tool as a “Notch”, there is a hole left

Using the "Hole Cutter", punch a hole in the center of the Noodle, 55mm deep. Remove the foam core using pliers. 

Glue the ‘Noodle Cup’ into the ends of the noodle with hot glue. 

Cut the "Ground Spike" at a 45 angle, Grind in the Notches using the "Notch Tool". 

Groundspike Tool added to put the spikes in the ground. 

Added a indoor variation to mount the Gate to your ceiling or walls with little wood screws.

Have fun and fly save