This is a powerful 3d printed flashlight with an output of 10k - 16k lumens based on the LED you choose to use.

Why This Project Is Worth Building:
This 3D-printed flashlight delivers performance comparable to high-end models from popular brands like the Imalent MS03 or Acebeam—at less than half the cost. While those commercial flashlights can run over $150 after tax and shipping, you can build this powerful alternative for under $85. Plus, you'll enjoy the rewarding experience of assembling it yourself.

All the 3d printed components cost only $3.5 or 117 grams of filament.

All purchasable components for this flashlight are listed below:

Main Switch: https://www.aliexpress.com/item/1005008778176373.html?spm=a2g0o.order_list.order_list_main.5.7cba1802j0yg90
Battery Capacity Switch: https://www.aliexpress.com/item/4000830670631.html?spm=a2g0o.order_list.order_list_main.101.7cba1802j0yg90
LED Reflective Cones: https://www.aliexpress.com/item/1005005841167657.html?spm=a2g0o.order_list.order_list_main.77.7cba1802j0yg90
Heatsink: https://www.aliexpress.com/item/1005005296622981.html?spm=a2g0o.order_list.order_list_main.83.7cba1802j0yg90
Battery Capacity Indicator: https://www.aliexpress.com/item/1005008464466886.html?spm=a2g0o.order_list.order_list_main.95.7cba1802j0yg90
USB-C Extension Cord: https://www.aliexpress.com/item/1005003598992802.html?spm=a2g0o.order_list.order_list_main.107.7cba1802j0yg90
Fan: https://www.aliexpress.com/item/1005008579692532.html?spm=a2g0o.order_list.order_list_main.122.7cba1802j0yg90
Battery Charging Board: https://www.aliexpress.com/item/1005004846748321.html?spm=a2g0o.order_list.order_list_main.127.7cba1802j0yg90
21700 Battery: https://www.aliexpress.com/item/1005006227005958.html?spm=a2g0o.cart.0.0.3ec438da2UkrGS&mp=1
Electrical Wires: https://www.aliexpress.com/item/1005006568588193.html?spm=a2g0o.productlist.main.16.7a7b30674JJHEO&
LEDs: https://www.aliexpress.com/item/1005005674036742.html?spm=a2g0o.order_list.order_list_main.149.5bf91802e1WG2j

Total Cost Of Required Items: CAD $82

Wires: CAD $18

Tools:

Solder
Superglue
Lighter or a heat gun
Spot welder (Highly recommended but optional)
Tape
Heat shrink

If you have any questions or concerns, feel free to contact me at " hydranceyt@gmail.com " or " .hydrance. " on discord.

Bambu Lab

A1

Yes

No

%15

Note: The cut you may have noticed on the case in the images was made for ease of soldering. The switches must be plugged through the holes and then soldered, however alternatives such as connectors exist. Use whichever method suites you.