Adapter to mount an Adventure Force Spectrum scope to the X-Shot Reflex-6 blaster. The adapter comes in two pieces, and are held in place by the scope. All parts are friction fit, no drilling or solvent welding needed.

Prusa

i3 MK2S

No

Yes

0.2 mm

30% to 100%

Can be printed vertically (with minimal supports) or horizontal (supports needed). I used Overture PLA, 1.75mm, Black. Print height is 0.2 mm, with 30% infill. Brim is recommended if you are printing the pieces in a vertical position.