This is a GoPro Session mount for the Armattan Marmotte. It is held on with two zip ties.

Print with the left side (flat surface) of the mount on the build plate. A thin layer of material was added on this side to aid in print bed adhesion. This material needs to be trimmed post print.

Other layers of material were added to openings to eliminate the need for support during printer. This material will also need to be trimmed post print. See the photos of the finished product.

Wanhao

Wanhao Duplicator i3 V2

No

No

0.1 - 0.2

100%

I added extra material to aid in bed adhesion, and to eliminate support material. You will need to trim the material as shown in the images.