Couldn't find an appropriate mount for the LACK enclosure mod so I just made one.

The main body of the mount is held via the two hooks that screw into the legs, I made it this way so you can remove the camera along with the mount without having to unscrew anything if you need to remove the printer from the enclosure.

Notes:

• No supports needed.
• There are two hooks needed, make sure to mirror one of them in the slicer as they are angled in a way that conforms to the right/left arms of the base.
• This should fit inside with room to spare for wall/door clearance.
• Printed at 0.2mm with PETG
• Printed all files at 100% scale, If hooks dont fit for some reason, print at 99 or 98% if you're unsure but clearance wasn't an issue that I found.
• Screw holes in the hooks are small, I did this so I could drill them out to fit the screws I had laying around, you will have to do the same unless you have really small screws.