I design the autolevel sensor bracket for used with Tevo Tarantula printer with E3D V6 hotend. There are 2 brackets, longer length ones is for E3D V6 Volcano hotend and the shorter length is for E3D V6 normal hotend. Also designed a layer fang fan holder which can be used to mount a layer fang fan.

The mounting holder bracket are oriented to the left of the hotend, if want to be mount to the right of the hotend, just use the mirror option on your slicer program. Distance from hotend to the Bltouch offset is 39mm.

The bracket is able to mount SN04 sensor or Bltouch.

Screws for mounting are all M3 and M3 nuts
2pcs of M3x25mm for mounting the E3D V6 hotend and the brackets
3pcs of M3x12mm or M3x10mm for mounting Bltouch bracket to the holder.
2pcs of M3x20mm for mounting SN04 sensor.
M3 washers

E3D V6 Magnetic X Carriage can be downloaded from http://www.thingiverse.com/thing:1829779

Layer fan can be downloaded from http://www.thingiverse.com/thing:1829779

TEVO

Tarantula

No

No

0.2

100%

PETG or ABS is recommended. PLA works too but may get soften if printer is enclosed or the environment heat is high. Print with the orientation set in the STL file no need to reorientate. No support needed.