Resin Tray
Marco Wilkerson
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-03-25 23:27:59
0
0
000설명
태그
모델 소스
리뷰(0)
First test tray I have made using a Phrozen: Sonic Mighty 4k resin printer. Mistakes were made during and after the print process, but this is how we learn. Besides that, the features such as holes and tapered cuts came out well. Used Phrozen's Aqua Blue as the test, but any resin is suitable for use.
Taper is 45* starting from inside (rectangle is 10mm by 5 mm) and expanding to the outside. Circles are 5mm in diameter. Part has maximum dimensions of 84 x 100 x 150 mm.
Provided SCAD, STL, and OBJ files (non contain embossment on the front) with this model.
Print Settings
Printer Brand:
Phrozen
Printer:
Sonic Mighty 4K
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Notes:
Did not use any supports for this model. Did not use a raft underneath the model, but can be used to help remove the part from the plate.
How I Designed This
Features
Features such as the holes and tapered cuts were centered on the selected faces, patterned along the faces, then mirrored across the midplanes to transfer features onto opposing faces.
태그
모델 소스
원본 링크: 자세히 보기
CC-BY