¼" thread Reverse Tripod Stand
craftmaker
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-03-27 18:02:29
0
0
000설명
태그
모델 소스
리뷰(0)
Simple demountable ¼" (standard tripod, but reversed) tripod base for supporting double-ended strobe mounts, etc. The cover image shows it supporting a Makers Making Change LipSync cutaway demo unit mounted on a short strobe stand in preparation for a build event .The other image shows version 2, which was much smaller.
You'll also need:
- ¼-20 4-lobed T-nut. These are meant for building furniture, but ATMakers discovered they fit into 3D-printed parts to make a simple tripod mount.
- (optional) anti-skid bumpers/rubber feet.
This is not a tremendously strong support. It was originally made because the Neewer brand clamp we were using to demo the LipSync didn't fit on most maker event tables.
Update, 2020-01 — updated tolerances, as they were too slack for a properly calibrated machine
Print Settings
Printer:
Reach 3D
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
40%
Notes:
Do not scale the model or the t-nut won't fit.
Doesn't need supports: unsupported parts are hidden underneath.Post-Printing
Remove the support inside the hub's t-nut well. You don't have to worry about cleaning out the small holes for the t-nut tines/lobes: leftover support material will help jam the t-nut in place.
태그
모델 소스
원본 링크: 자세히 보기
CC-BY-SA