I wanted to create a case for the lcr t4 board that matched the look of my other meters. This one uses the 9v battery.

The connectors on the front are standard 4mm jacks Mounting hole diameter = 8 mm, I got mine here https://www.gme.cz/zdirka-panelova-4mm-zluta-k214 although there a pretty common item you should be able to find them on ebay or your local electronics shop.

screws for the case and to secure the board where m2.5 x 12 mm (you need 8) you could probably squeeze in some m3 if you need to. You will need to print 4 spacers to secure the front screen or buy some really short screws.

Prusa

Prusa Clone

No

No

0.3

100

Should be easy to print. Printed with Cura 4.2