You will need to print at least one bottom and two sticks. Though having multiple stands is nice. If you play History Maker Golf, print the horizontal-left and horizontal-right models. You can print a second set of sticks to support the bottom of the HMG book, but I don’t find it necessary.

I print these with PLA with a .3mm layer height and 20% infill. I print the horizontal pieces on their side and print with supports on the build plate.

The following non-printed parts can be sourced from Amazon or Etsy. I’ve provided a few links directly to products. You can try other types of 3/16-inch rod. I find the brass has a nice weight without being too expensive. The steel sheets will attract magnets and 20 gauge is plenty thick enough.

Brass Round Stock 3/16 inch in Diameter 12 Inches in Length

20 gauge Steel Sheet measuring 9 inches by 12 inches