This is my concept of the LazyMan Spool Holder

Why LazyMan in the name ? Simply because it doesn't need ball bearing and don't need screw etc, it's fully assemble by 3d printed parts and there isn't that much parts, they are small that let them be printed by most of 3d printer users
To print it you will need 100l110L120H mm for all the pieces with recommended print

It's a large spool holder for 1kg // 1000g plastic spool.
All parts (except "Partie latérale pp3dplus) are to print 2 times

--> "Partie Latérale pp3dplus is to print ONLY if you have this type of 3d printer or if it fit.
(1mm space between 2parts 10mmlarge and 15 mm long for the grip)

It's a model with clips so you don't need to glue (only if you don't want to modify)

It's also a work in progress because i'm thinking on evolve a part to fix the spool by the center but i don't know if i will add it.
It's a very light model and i'm using it since i bough my 3d printer and never had problems with this spool holder.

Up!

Up Plus2

Doesn't Matter

Doesn't Matter

Normal-Slow

Medium to less infill possible

FOr the rotation axis print them by the up and not horizontal, make it the most filled possible and finest possible because it will have direct contact.

For the clips rotate them to make the hole on the top (flat size on the bottom)

"Base de symétrie" is to print with support 45° and filled up, print it with normal speed or fine if you want