Micron E.M.E Cobra extruder Mount for FlashForge Creator Pro 3D printer.

Cobra Extruder Link:
https://micron-eme.com/collections/all-metal-extruders/products/cobra-extruder-single-version

This mount enables to install Cobra extruder on FFCP, which replaces the original Mk10 extruders.
Note that installing Cobra extruder will convert the FFCP double extruders to a single extruder.

The advantages are:
Lower carriage mass(380[g] compared to 600[g]) which enables higher acceleration and speed.
Full metal extruder which enables to print any kind of filament, including PLA, ABS, PETG, Nylon, TPU, PC, CFRP PLA, Copper PLA.
Fast and easy Nozzle switch, thanks to a simple nozzle replacement mechanism (Detachable Filament Guide and Nozzle Module).
Heavy-duty extruder enables to print for long without jams or skipped steps.
Easy filament loading and unloading.

The mount is compatible with the original FFCP carriage and doesn't require any drilling or permanent changes.
One would need to reposition the Z-axis endstop because the print bed must go a little bit higher than normal. (It is recommended to replace Z endstop with Z Probe to enable Auto bed leveling).
Important: High Flow Nozzle must be used, because they are longer compared to the default Cobra nozzle.

High Flow Nozzle Link:
https://micron-eme.com/collections/parts-accessories/products/copy-of-high-flow-rate-guide-and-nozzle-for-cobra-extruders

Extruder specs:
Stepper motor: NEMA11
Planetary gear with gear ratio 1:13.76
Stainless steel (304) Hobb gear diameter 9.6[mm]
Recommended Steps-per-mm (for x16 microstepping): ~1600
Recommended motor current: 800[mA]
24[V] 60[W] Cartridge heater
Ungrounded Type-K Thermocouple.

Update
New version:
FFCP-CobraExtruderMount-Solid-V8
Improved design, and better fit.
Require longer bolts: M3x45, secured with M3 nuts.

FlashForge

Creator Pro

No

No

0.2

50

Printed with PETG filament.

Use M3 tap to create a strong thread that will enable to connect the mount to the FFFCP extruder carriage.

Use M4 tap to create a thread to mount Z Probe.
In case you use "DC42 IR Probe", this mount fits perfect:
https://www.thingiverse.com/thing:2136474
ProbeMountVer6.stl