Complete more advanced challenges with the Micromelon Digger attachment. Powered by 2 small 9g servos connected to the Rover's servo connectors.

You will need

1x Micromelon Rover

1x 9g metal or plastic gear servo motors (with included screws)

8x M3x10mm screws

8x M3 Nuts

Assembly

Connect the motors to the rover using the Servo connectors on the back. Pay attention to the orientation of the connector.

To get started using the motors in the Code Editor check out the blog post on servo motors at https://micromelon.com.au/resources/

Category: Robotics