Printed solid in ABS, in an enclosure. Some support needed.

Required hardware:

• Nema17
• Mk7 hobbed extruder gear
• Grooved 608 bearing
• M5x15mm bolt
• M5 nut
• 2 of M5 washers
• Extruder Spring
• M5x25mm bolt
• 2 of M5 Slim Pre-Assembly T Nut
• M5 Bowden push fit coupling
• 2 of M5x12+mm bolts for fixing to 2020 extrusion
• 2 of M5 washers
• 2 of M5 T-nuts
• 2 of M3x12+mm bolts for fixing motor
• M3x20mm bolt

Category: 3D Printer Extruders