Summary

This box is designed for the SKR mini V1.1 and a Heatbed FET module.

There are now two versions,

Version 1: (old)
The upper housing part snaps on the baseplate.

The deflector (above) has to glued on.

Mount the electronic boards with M3 screws, the base is designed to grab the screws.
Optionally, you can use curled inserting nuts M3x5x5.

Version 2:
The walls are slightly thinner and the Fan build into the case,
the case is screwed on and the deflector snaps in.

Between the boards are two rows of independend Supply-Connectors to extend the supply connections for fans and other stuff,
there are simple some JST-XH connectors are simply soldered and bonded together on a standard prototyping PCB (not exactly 20mm x 50mm in size).

Use a microSD card extender to use the integrated microSD card.

Changes:
Version 2: the Fan is incuded in the Box, slight smaller Dimensions than Version 1.
Version 2.01: the Fet Module moved a little bit down, more Zip-Tie Slots for innner cable management.
Version 2.02: The dimension is a little bit taller (3mm) because the Terminals touches the case.
Version 2.03: The fan was raised a litte bit
Version 2.04: Window for FET-Board enlaged