Summary

• THIS IS A WORK IN PROGESS AS I HAVE NOT FINISHED DESIGNING THE HANDLE *

My daughter wants to be Zoey from Huntrix on Halloween and she wanted an Light Wand. While looking around, I found a few options but I didn't want to pay for the wand and I didn't like any of the paid or free STL files I could find so I designed my own.

This is designed around the KunHe rechargeable LED lights found on Amazon. I tore out the guts and designed the case around it.

The core - what I call the "Shade" - is printed in a transparent PETG and has a void in the center to allow the light to disperse as evenly as possible without the infill blocking too much of the light.
The "Wire" is printed in blue PETG. Two of these need to be printed; one for each side of the shade.
The "H" is printed in White PETG. Two of these need to be printed and have small alignment pegs to help position them. I pressed them in and put a small drop of CA glue on the back side of the peg to hold them onto the "Wire".
The "Collar" will house the "Shade" and two "Wire" parts. I did create a small lip to help position them but it won't permanently hold them in place. I just plan on using CA glue to hold these parts in.

I am currently working on the handle design which may change the Collar connection design slightly.

KunHe rechargeable LED lights:
4 setting dimmer (off, bright, mild, dim)
Momentary push button switch
USB-C charging port
200mAh 3.7v battery

• if you remove the small yellow 'lense' attached to the LED, the light will have a purple hue.