Holds 15 PACKS OF EXTRA GUM!!!

GIVE EXTRA GET EXTRA

I would recommend that you print the text separately as its not quite built for overhangs. The only place that needs support will be the text as it is slightly raised.

(A v2 is in the works!)

Printed in 10 total parts:

• Main Body 
• Face Plate
• Left Give
• Left Get
• Right Give
• Right Get
• 2x Left Extra
• 2x Right Extra

Example Print Info:

Printed on a Bambu Lab P1P w/AMS

Total print time for everything: ~ 14hrs

Text was superglued on after printing

Main Body:

• Printed base side down
• 0.40mm Nozzle
• 0.20mm Layer Height
• 2 Walls
• PolyMaker PolyTerra Army Beige PLA 

Face Plate:

• Printed internal side down
• 0.40mm Nozzle
• 0.20mm Layer Height
• 2 Walls
• Inland White PLA 

Text Tags:

• Printed with raised letters side down (needs supports) 
• 0.40mm Nozzle
• 0.20mm Layer Height
• 2 Walls
• Inland Purple PLA & Inland White PLA 

Please comment if you have any questions or changes you would like to see!

Also let me know if you would like a tutorial on how to make this in SolidWorks.

Version 2 planned updates:

• Greater angle between wall side and slide side to allow packs to slide off each other
• Print reorientation to account for strength
• Thinner walls
• Tighter dimensions on slide to prevent a pack from sliding out early
• Thinner Face Plate
• Face Plate reorientation and redesign to allow for nicer surface finish
• Additional changes to fillets and chamfers to allow 0 support printing
• Text design change to Allow for complete 1 piece printing and 0 support printing
• Possible v2.1 for use on desk

Image by <a href="https://www.freepik.com/free-psd/cartoon-comic-explosion-illustration_158196509.htm#query=cartoon%20starburst%20illustrations&position=1&from_view=keyword&track=ais_hybrid&uuid=c820fa9a-9720-4b36-8471-0f8c120c6cb1">Freepik</a>