Airpod Mesh Replacement
Nifty Clay
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-04-04 05:12:14
0
0
000설명
태그
모델 소스
리뷰(0)
I always clog up the mesh on my Airpods with earwax and rip the mesh out. This time I decided to print a replacement that I can throw away and replace easily. This is for my Airpod second generation. I included the fusion file, the stl file, and a file you can load right into PrusaSlicer (assuming you have a .25mm nozzle).
NOTE- Don't blame me if you damage your Airpods putting these in, or they fall out and get stuck in your ear canal or something. Use at your own risk!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
Notes:
You should print this with a 0.25mm nozzle or smaller! I sliced in PrusaSlicer with no top or bottom layers, 2 perimeters, and a rectilinear fill pattern at 30%.
태그
모델 소스
원본 링크: 자세히 보기
CC-BY-SA