This clip allows you to mount a Rodret switch over an existing uk power switch. You can still operate the real switch below either by un-clipping the metal plate or using a rod to hit the switch through the holes in the Rodret plate.

See post printing for assembly instructions. Use the part layout provided in the STL file for maximum part strength.

The mounting holes are 60mm apart, and the clearance between the rodret plate and the switch baseplate is 6mm.

Carefully file the two retaining clips so that they fit snugly into the slots, gently hammer the clips into place.

Test fit the Rodret metal plate and ensure that they do not move when clipped in, filing the piece if necessary.

The mount can be fastened to an existing switch plate using the existing screws. Get an electrician to do this if you don't feel comfortable.

Press the Rodret switch into place -- done!