If you have an older pinball machine with the power switch under the front corner of the cabinet, but someone gutted the switch or lost the plate that mounts it, then this may work for you. It was designed specifically to fit a Spanish Eyes, but it's likely that this will fit many, many games. It was also modeled to be an exact fit for the following replacement switch, including the guide notch to keep the switch from rotating, but it should work with any other switch with a similar enough mounting hole pattern:

https://www.amazon.com/dp/B078KBC5VH?psc=1&ref=ppx_yo2_dt_b_product_details

We made it 3mm thick so it would be strong and durable, which works fine with these switches, but if you want it a little thinner for some reason, you could scale the Z axis down to 67% and get a 2mm version, but we wouldn't recommend going any thinner than that.

If you're missing the whole switch box (or it's too damaged to use), then go with the full box option. Both the plate and box options come in flush or countersink screw hole variants.

Voron 2.4 350mm

No

No

200

40