YAWM, Yet Another Wall Mount, needed vertical attachment to wall. Fits most (or all) ‘UFO’ versions, Nano HD, AC Lite etc, with the mounting plate provided. Can be mounted either way vertically.

Hardware needed: 4 x M3 heat inserts (max 5mm length) and screws M3 x 10mm, 8mm might work too. 2 screws for wall mounting, but that depens of your wall material.

Fusion 360, .step and .stl files provided.

Print settings:

• See orientation in picture
• I used ‘20’ walls / perimeters, as I wanted it with 100% infill.
• Layer height 0.2 to minimize needed supports.
• Put support blockers on all holes, they print fine. Little support on start of curve (overhang threshold 40)
• Also used fuzzy skin as it will be in visible place. Prusaslicer 2.9 Paint-on fuzzy skin is excellent tool for this with Smart fill. So only outside fuzzy skin is easy to apply.