A inset for the QUBE 500 to place a (addressable) RGB LED Chip inside one hole.

Trade your airflow for more RGB.

Designed for WS2812B with a round ⌀10mm pcb to be glued to the printed part.
Currently waiting on my order so instead I used a WS2812B from a cuttable LED-Strip.

You can use the adafruit neopixel library and a microcontroller to control the LEDS.

Should also work with other 5050 SMD LEDS chips who are on Strips(or <⌀10mm pcb) as long as they are cuttable every single chip and can be bend near the LED itself(no resistors that might get damaged)

Tested on this model
https://www.printables.com/model/590237-test-holes-qube-500