A while back, I purchased a generic "Made In China" electric air duster, and very quickly lost the blower attachments it came with. The original package came with a cone shaped adapter, and a fan(wide) adapter.

These replacement adapters i've designed, were not designed or modeled after the original parts; I wanted them to be better. The brand name of my blower is "HouSmile" & the Model: FSA-501.

If you like my work, and wanna buy me a coffee follow the link below & thanks so much for your support!

These may work for many other "generic" electronic dusters out there, but here are some dimensions so you can see if they will work for you:

Cone Attachment Specs:

Outer Diameter(where attaches to tool): 14.35mm - 0.556" At Blower Tip: 5.54mm - 0.218"

Inner Diameter(at point of attachment): 10.8mm - 0.425" At blower tip: 3.75mm - 0.147"

Length(end to end): 127mm - 5"

Fan(Wide) Attachment Specs *Inner & Outer Diameter at point of attachment is the same as mentioned above^

Length(end to end): 106.8mm - 4.204"

Blower Tip Width: 21.85mm - 0.860"

Blower Tip Accross: 6mm - 0.235"

The inner diameter of my blower tool(where my attachments slide in) is 14mm - 0.552"

This is my first ever designed posted online, and though simple, I really hope it can help others out there with similar air dusters. Thank you so much!

Print Settings

Printer Brand:

Creality

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.2mm

Infill:

**Filament:** Overture PLA Cobalt Blue/Red

Notes:

Category: Office