This is the complete redesign of the mount designed by "jirisliz". But his mount is good when printed in ABS, else the locking tabs that goes in to kinect base can break when printed in PLA. I very much liked his design, but then decided to redesign the whole mount to be able to print it in PLA.

This mount can be printed in PLA, and is lighter in weight, prints in lesser time, and uses less material too.
Print the stl file. It has 3 parts ->

1 - main body of mount

2- 4.5 mm wide bars (2 pieces) that goes in to the grooves at the back of the mount body, and provides strength (by preventing separation of layers). Glue it in to the grooves using quick setting epoxy.

3 - Tabs (2 pieces) that goes in to the Kinect sensor base. Glue them with epoxy in to the holes present on the base of the mount. The way they are printed, and then glued, makes them stronger, and prevents their breakage even when printed in PLA.

Just squeeze the mount from its front to easily unmount the kinect sensor.

In one of the pictures, you can see it mounted on to my basement pillar, as a 3D scanner.
I hope, you guys will like it :-)

Tronxy P802MA

Doesn't Matter

No

0.3

45%