This is a very simple mount allowing you to attach 2 of the CTR-Electronics CAN bus connector blocks to a Swerve Drive Specialties MK4i module. This allows you to easily connect the CAN wiring for the CANCoder, and the two falcons to the main robot CAN bus. 

Print settings

Installation:

1. Remove the bolts securing the metal top cover over the CANCoder
2. Remove the two standoffs as shown in the image.
3. Mount the connector blocks to the part with M3*6mm bolts
4. Slide the mount in where the standoffs were
5. Re-insert and fasten the bolts