Update: I realized that some printers cannot print the overhang associated with the block numbers on the outer ring (ring_outer_Aurebesh_print4.stl). So I created another outer ring with rounded numbers (ring_outer_Aurebesh_rounded_print4.stl). Hopefully all the printers can print this outer ring.

My rounded Aurebesh Numbers are here:
https://www.thingiverse.com/thing:6709600

Original Post:
This is a simple 4 ring cryptex with Aurebesh numbers with a compartment to hide a prize.
I printed this one with Elegoo Silk Gold to look like C3PO
This is a remix from rwsmith123 "USB Flash Drive Variable Cryptex"
The Aurebesh Numbers came from can.of.t.designs.
https://www.tinkercad.com/things/b0safRbiZfZ-aurebesh-numbers
I also included a blank outer ring so others can put numbers of different fonts.

No Supports were used.

PRINT 1 OF THE FOLLOWING:
main_body.stl
cap.stl
compartment_male_nub.stl
compartment_female.stl

PRINT 4 OF THE FOLLOWING:
ring_inner_print4.stl
ring_outer_Aurebesh_print4.stl (or) ring_outer_Aurebesh_rounded_print4.stl

Bambu Lab

A1

No

No

0.2 mm layer height

15% Gyroid

This cryptex was printed with a Bambu X1C.
Initial Layer 230oC
Other Layers 230oC
Smooth PEI Plate/High Temp Plate (Initial Layer): 60oC
Smooth PEI Plate/High Temp Plate (Other Layer): 60oC

The file "ring_outer_Aurebesh_print4.stl" will need brims or mouse ears.

Weight: 48.52g
Filament Length: 15.28m
Dimensions: 35mmx37mmx70mm High