Summary

Overview

Here is the Bruiser230, 230mm/6" Quadcopter frame (CNC Version)

This design was made with replaceable arms and braces to make it easier to swap out the arms instead of the whole frame. Swapping the arms can be done without removing the canopy so as not to interfere with the electronics; just loosen the arm screws and replace the arm.

Supports 30x30 or 20x20 mounting patterns.
Supports 16x16 or 19x19 motor mounting patterns.

Flight Test

https://youtu.be/oNwiqLtUpw8

HD Flight

https://youtu.be/Rkx6JNvFqb4

The canopies included are not my design, I take no credit for them