NOTE:

Is sized specifically for the side spool holder that comes with the printer. May not fit other 3D printed spool holders!!!

A simple Creality spool holder extension I made in Creality's reskin of OrcaSlicer. I've also provided a generic assembly project .3mf file if you would like to modify or customize it, along with a test print to make sure the diameter will fit before printing the entire extension.

PRINT SETTINGS: 

I would recommend printing from the .3mf file instead of the STL for a stronger print. 

• Printed it as 0.6mm (0.4 is fine if that's what you have) 
• 10 walls
• 25% infill (a 3d infill of some type like 3d Honeycomb or Gyroid if available) 
• Sunlu PLA+ 2.0 filament
• (Optional/Recommended) Turn on organic tree supports (auto) to support the top depth stop of the vertically oriented print.