Sunlu spool storage solution
fab.learn
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-01-18 06:16:54
0
0
000설명
태그
모델 소스
리뷰(0)
I made a turntable from one side of the spool (you can find it in my profile) and this storage solution from second side of the sunlu's spool.
Need to use glue for penholder's bottom cork (place it on the table and add some glue from the inside). For the top part of the penholder you can also use glue if you want although not necessary, but the part doesn't lock on firmly by itself.
Need to use glue for penholder's bottom cork (place it on the table and add some glue from the inside). For the top part of the penholder you can also use glue if you want although not necessary, but the part doesn't lock on firmly by itself.
Parts for the penholder:
0.2 layers.
5 walls (cork 3 walls).
15% infill.
4 top/bottom layers.
Container part I printed with only 2 walls, 3 tops/bottoms and 0.24 layers so it would print faster. Printed everything with PETG.
태그
모델 소스
원본 링크: 자세히 보기
CC BY-SA