LumiLeaf: Modular Open-Source LED Wall Panel
Liam Guerrero
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2025-12-22 21:23:40
0
0
000설명
태그
모델 소스
리뷰(0)
The LumiLeaf is a fully modular adressable LED wall light. It features any number or configuration of triangular panels, with 15 individual zones per panel!
WARNING:
These parts are very complex and challenging to print. The assembly is very time consuming, but does yeild a great result.
Due to the nature of these LEDs, a very large powersupply is required. Each module can draw. maximum of 1.2A, so a high quality, high power power supply is required.
Assembly
Bill of materials (per module constructed)
| Part | QTY | Info |
| Addressable LED strip | 250mm (15 LEDs) | 60 LED/M |
| M3x8 SHCS | 3 | |
| M3x6 BHCS | 4 | |
| M3 washer | 4 | |
| Base module | 1 | 3D Printed |
| Bezel | 1 | 3D Printed |
| Joiner disk | 3 | 3D Printed |
| Diffuser | 1 | 3D Printed/Cut |
| Foil | 1 | See instructions |
| Double-sided tape | - | See instructions |
| Solid core wire | 4 colours | See instructions |
Assembly Instructions
https://github.com/LordBBQ/LumiLeaf/tree/main
Fabrication
Base module
| Supports | Adhesion | Layer height | Material |
| No (custom supports included) | As required | Any | Any (ABS recomended) |
Wall mount
| Supports | Adhesion | Layer height | Material |
| No | No | Any | Any |
Bezel
| Supports | Adhesion | Layer height | Material |
| No | No | Any | Any |
Diffuser (FDM/FFF)
| Supports | Adhesion | Layer height | Material |
| No | No | Any | Translucent |
Diffuser (Subtractive manufacturing
| Supports | Thickness | Material | |
| No (custom supports included) | As required | 3mm | Semi-translucent acrylic/pc |
태그
모델 소스
원본 링크: 자세히 보기
CC-BY