A postmodern Lavalamp
SouthMop4
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-03-27 02:58:48
0
0
000설명
태그
모델 소스
리뷰(0)
Lavalamps are awesome right?
But in 2016 we have these amazing technologies like addressable LEDstrips, microcontrollers and a buzzing DIY electronics crowd.
Because of all that i made this lavalamp.
You are free to make your own, i might even send you the openScad file if you are interested, i just wont put it here because it is a mess. ;)
Wou will need to put something shiny in the lamp.
I used a 10mm aluminium rod and a usblinky kit [0].
[0] http://www.hackerspaceshop.com/blinky/usblinky.html
Print Settings
Printer:
The machine with the bing.
Rafts:
Yes
Supports:
No
Resolution:
0.3mm
Infill:
100%
Notes:
LAMP:
The lamp itself took about 60 hours to print.
Using 100% infill is important, also use CLEAR filament as it is a good light guide.
Use a brim for the lamp and no support structure.
STAND/SOCKET:
You dont need a brim for the stand but make sure to use build plate touching support material.
I used black filament, white might also look good.
Post-Printing
Insert the Ledstrips
and attach the controller (usblinky[0] in my case).
[0] http://www.hackerspaceshop.com/blinky/usblinky.html
Assmble stand and lamp..
..using 4 woodscrews (ca 3mm, 6-10mm length)
태그
모델 소스
원본 링크: 자세히 보기
CC-BY