Tiny Utility Knife: Try not to lose it!!

Comes in 3 parts: the two main body components and the slider for the blade. The body should clip together well, but to prevent it from splitting apart, a 3mm bolt should be inserted into the hole at the rear. The fit for the slider should be snug enough so the blade doesn't slide out when not pushed; this will also require a 3mm bolt through the blade and into the slider.

External hardware needed: 2 M3x4mm Bolts. It could possibly use shorter length bolts, but I haven't tested it.

I ran it at a 0.08mm Layer Height on the A1 Mini, 0.4mm nozzle.