Hello all, enjoy my valentines day candy heart themed coaster.

The design was made to be customizable, easy to print and easy to assemble no glue needed.

To make this find two colors at least you may want to use, one for the text the other for the heart. You need at least 15 grams of each to make, I used some sample filament colors i had laying around.

For the heart I used 5% infill, 2 walls and 4 top and bottom layers.

For the text i just made them 100% filled with the same walls and top and bottom as above.

After your done printing just snap the text into place and there you go complete.

I included a step file for the heart if you would like to make your own in your 3d modeler of choice. I also linked my onshape model so you can copy and modify. 

https://cad.onshape.com/documents/3eafa0e64aa45119df3d8288/w/f8647ca380c0641d1bb1b959/e/3ee7ab29475ca1ec26290ae1?renderMode=0&uiState=63df1881824ec55ee74a9d8c

In the model the text is 1.5mm tall and has a draft angle of 5 degree to help the text snap in easier.

Hope you enjoy!