Summary

Summary

This is a charging cradle for the Seeed Studio T1000-E. Prints with no supports and about 10% infill.

For dimensional accuracy please use Outer/Inner perimeter order.

I took sebsx's awesome design and added some of my touches to it.

I cut out the top chamfer to make way for my keyring.
I added some wall hanger screw slots.
I cut out a tiny tiny bit around the magnet adapter as the friction was a little much when printed on my printer.
I added a modular insert for adapting to USB C or anything else you want. You have to splice into the original cable. I suggest buying another cable so you can still update the firmware or instead use a usb c breakout board with data.

I already had some of these USB PD power only adapters so I designed the USB insert around those. (WARNING THE VOLTAGE DIP SWITCH OPTIONS LISTED ON BACK OF THESE ARE WRONG. You will need to do some trial and error playing with the dip switches.)
https://www.aliexpress.us/item/3256808182904772.html?gatewayAdapt=glo2usa

Original created by sebsx!
https://www.thingiverse.com/sebsx/designs