Enclosure for 2 push buttons.

I have designed this to use as a external power button for my desktop PC and as the button to switch between PCs through my KVM switch

I'm using this KVM switch which comes with its own external button, but I have decided to use this single enclosure for both my PC power button and the KVM switch button (You can see the current external button in the attached photo)

For the external power switch I have used 2 standard female to male jumper cables and a USB Type-C connector mounted onto the PCI slot using a 3D printed back plate. The button is connected to a USB Type-C cable. I cut off the USB-A connector and directly connected the +ve and -ve wires to the button.

Creality

Ender 3 Pro

Doesn't Matter

Yes

0.2mm

20%