made this because i could not find a s8 active case to print made it to be printed without supports and i eliminated the ear phone jack on the bottom cuz i have bluetooth and i didnt expose the finger print reader cuz i never use it and its finiky so i didnt make a hole for it. if you need one you can add it in tinker cad.

Wanhao

Wanhao Duplicator i3 Plus

No

No

.2

35

so here is my print settings for s3d for the amazon flex
101 extrusion
50 bed temp
218 nozzle 1st layer
225 after that i found with a lower temp the filament would build pressure in the nozzle upping it removed stringing cuz there is no backpressure.
1mm retract with micro swiss all metal hot end
.4 coast
no wipe
35 infill
.2 layer
.24 first layer
0 fan 1st layer
30 fan second layer
50 fan after that
.6 z hop
35 mm/s retract speed
and i print 5 5 5
5top
5bottom
5walls
infill type is rectilinear
print speed 20mm/s
if you need anything else let me know
also ambient temp is 65-68