Ninetales keychain based on the official art. Made at the request of a friend. Can be printed in one or multiple colors. Measures 60 x 65mm.

Multi Color Instructions:

You will need four colors of filament white, black, beige, and orange.

You will need to change filament three times as instructed below:

1.  Start the print with white
2.  Change to black at layer #16 (3.2mm)  
3.  Change to beige at layer #18 (3.6mm)  
4.  Change to orange at layer #24 (4.8mm)  

Recommended Print Settings:

• PLA
• .4mm Nozzle (Or smaller)
• .20mm Layer height
• 30% Grid pattern infill
• Top solid layers = 6
• Perimeter generator = Arachne
• Perimeter transitioning threshold angle = 59°

It is important to make sure the Perimeter transitioning threshold angle is set to 59° otherwise there will be gaps in the perimeters at sharp angles.