Hello,
So this is the LAME Bed Shelf!

It can easily fit the large cup of coffee or big ass phone! :P

My first project! It's definitely not perfect but pretty useful and sturdy so why not to share it? :D

Dimensions:
148x202mm outside
110x157mm inside
frame bed hook for 28mm

What you will need:
-Patience
-Some rest of cheap floor panel 7-8mm thick or some other thing to fill the walls.
-Some Glue (iam not any expert of that or anything else... so you will need to find the right solution.)
-Some handsaw or other tools to cut panels
-Some patience again xD

Panel cuts sizes:

front 156x48
back 152x48
sides 128x48
bottom 152x117

I suggest to -2mm on all sizes at least to easy and safe assembly :P and before you cut some panels just check if my measurements are good because man I am not good at math or English :D

As you can see there are few +5mm parts because of side and front differences in look :P just check out on the photo! I like it that way but if you don't just use +5 parts.

Yes

0.2.-0.3

20-35%

Top bottom 3-4
Wall 3 at least but prefered 4 or more if you want! Who am i to forbid you?

Use lower resolution for parts with connection points and do not forget about supports.