Summary

This remix of "ReadTheFactoryManual" Pi zero tft case was created to accommodate an older version of a Pi Zero without wireless. In my version I soldered on an EDIMAX usb wireless device to the rear of the pi. So, I needed more space under the pi to make room for it.

In this remix I expanded the back of the case and created a pit under the pi. The right angle connector also needed a space under it so I dug a pit for that as well. I also enlarged the hole for the SD card and made the TFT space .5 mm larger.

This was all accomplished with Fusion 360. (Thank you AutoDesk)

The case will be used to enclose a weather station client that queries a SwitchDoc Pi weather station.

8/21/2020
Added a storage space for a stylus.
Added a front panel cover with a rounded face (frame.stl).

10/18/2020
I made the case taller by creating a 30mm base.