Google Nexus 9 'tactical' tablet holder

This case was designed to make Google Nexus 9 tablets easy to sling over your shoulder and carry around during a LARP event I was helping run.

I settled on using the Nexus 9 in the LARP as it's an old tablet that can be picked up cheap on eBay but is still good enough for use to play mini-games do video calls and so on.

To assemble the case you will need four M4x20 screws for the rear cover and optionally two M4x20 screws to add these picture hanging D-rings for attaching a strap. I'm pretty sure you could bodge up some other way of fixing the strap if you want.

The buttons will need sanding on the long edge to work nicely with your particular tablet. I found the individual tablets varied slightly in how far the buttons stuck out and just finessed them by hand until they worked nicely.

This is a fairly niche object but I thought I'd put it up in public, just in case. Sorry there's no version for smaller printers but the tablets are a bit large to begin with and having access to a CR-10 Max, I just designed it to print as flat pieces.

Creality

Ender 3

No

No

200

38