This elegant 3D printable bowl features a modern spiral pattern design, perfect for enhancing any space with a touch of sophistication. Its clean lines and sturdy structure make it both visually appealing and practical. Ideal for use as a decorative piece to hold pebbles, crystals, or flowers on water.

Recommended FDM Printer Settings:

• Material: PLA or PETG (for a glossy finish and durability).
• Layer Height: 0.2mm for a balance of speed and detail, or 0.1mm for finer detail.
• Infill: 0% (use vase mode or spiralize outer contour).
• Wall Thickness: 2–3 perimeters (1.2–1.6mm).
• Print Speed: 40–60mm/s for smooth results.
• Nozzle Size: 0.4mm.
• Bed Temperature: 60°C (for PLA) or 70°C (for PETG).
• Cooling: Use a fan at 100% for sharp edges and smooth curves.
• Adhesion: Use a glue stick or painter’s tape for bed adhesion if necessary.

Note: Enable vase mode in your slicer for continuous, single-wall printing to achieve the best results with minimal material usage. Ensure your printer is well-calibrated for optimal layer alignment and a flawless finish.